|
|
|
|
| Category:
Cameras & Photo
/
Film Cameras
/
35mm Rangefinder
|
 |
| Start Price: |
USD 31.50 |
Click Here
to See More
|
| Current Price: |
USD 31.50 |
| Reserve Price: |
- |
| Time Left: |
- |
| Bid Count: |
0 |
| Buy It Now Price: |
- |
| Start Time: |
9/30/2008 |
| End Time: |
10/7/2008 |
| Location: |
Wellsville, Pennsylvania |
|
Beljan's Multi-Camera lens/shutter wrench Beljan's Multi-Camera Lens / Shutter Wrench We have designed and manufactured this wrench in the USA. It is used for removing the lens/shutter assembly on Kodak Retina, Retinette, Afga, Ansco, Zeiss and other cameras that use the same lens/shutter mounting system. The wrench handle is made from anodized hex aluminum. The body is made from black oxidized cold rolled steel. THE BUY IT NOW PRICE IS THE TOTAL PRICE YOU PAY IN THE USA WE NOW ACCEPT INTERNATIONAL BIDS! What it fits Our wrench has been tested and found to work with Kodak Retina cameras models Ib, IB, IIc, IIC, IIIc and IIIC. It also works on the Retina and Retinette Ia, II, IIa, IIA. The wrench has also been tested on the following cameras, click to see a picture of the camera. 1. Agfa Karat Model 36; synchro-compur shutter; Schneider-Kreunach 50mm f/2.8 Xenar lens. 2. Agfa Karat Model 36; synchro-compur shutter; Schneider-Kreunach 50mm f/2.8 Xenar lens. 3. Older Agfa Karat Model 36; synchro-compur shutter; Rodenstock Heligon 50mm f/2.0 lens. 4. Agfa Karat Model 36; synchro-compur shutter; Schneider-Kreunach 50mm f/2.08 Xenon lens. 5. Agfa Karat Model IV; prontor-SVS shutter; Agfa Solinar 50mm f/2.8 lens. 6. Agfa Karat Model 36; synchro-compur shutter; Agfa Solinar 50mm f/2.8 lens. 7. Agfa Karat Model IV; prontor-SVS shutter; Agfa Solinar 50mm f/2.8 lens. 8. Agfa Karat Model 36; synchro-compur shutter; Rodenstock Heligon 50mm f/2.0 lens. 9. Agfa Karat Model 36; synchro-compur shutter; Agfa Solinar 50mm f/2.8 lens. 10. Agfa Solinette; prontor-SVS shutter; Agfa Solinar 50mm f/3.5 lens. 11. Ansco Regent; prontor-SVS shutter; Agfa Apotar 50mm f/3.5 lens. (Camera made by Agfa; marketed by Ansco). 12. Ansco Super Regent; synchro-compur shutter; Agfa Solinar 50mm f/3.5 lens; coupled rangefinder; (Camera made by Agfa; marketed by Ansco). 13. Zeiss Contaflex Single Lens Reflex; synchro-compur shutter; 45mm f/2.8 Zeiss Tessar lens. 14. Kodak Retina IIa; synchro-compur shutter; Schneider-Kreunach 50mm f/2.0 Xenon lens. 15. Kodak Retina Ia; synchro-compur shutter; Schneider-Kreunach 50mm f/2.8 Xenar lens. 16. Kodak Retina II; synchro-compur shutter; Rodenstock Heligon 50mm f/2.0 lens. 17. Kodak Retina I model 010; compur-rapid shutter; Schneider-Kreunach 50mm f/3.5 Xenar lens. 18. Kodak Retina I model 013; compur-rapid shutter; Schneider-Kreunach 50mm f/3.5 Xenar lens. 19. Kodak Retina II (the II is circled); compur-rapid shutter; Schneider-Kreunach 50mm f/2.8 Xenar lens. 20. Kodak Retina I model 013; compur-rapid shutter; Schneider-Kreunach 50mm f/3.5 Xenar lens. 21. Kodak Retina I model 010; compur-rapid shutter; Kodak Ektar 50mm f/.3.5 lens. Why you need this tool As you know the retaining nut that holds this assembly in place is very difficult to remove with ordinary hand tools. The retaining nut is deeply recessed into the camera body and there is very little room to work. The retaining nut has a very thin wall and can be easily damaged . Our wrench has been designed and manufactured to very close tolerances to be a precision fit. This greatly reduces the chance of damaging your camera. The slots in the retaining nut are quite small, and at first glance it appears that aligning the tabs on the wrench with the slots in the nut would be a tedious operation. However, with our precision wrench all that it takes to engage the tabs is a turn of the wrench and the tabs drop right into the slots. How it works Pictured below is a Kodak Retina IIIc To use our wrench simply open the front door of the camera and extend the lens, open the back door and insert the tool. Insert the tool past the film rails into the camera body and turn the wrench to engage the tabs on the tool into the slots in the retaining nut. Turn the wrench counter-clockwise to remove the retaining nut. The lens/shutter assembly can now be removed from the camera. Our tool turns a really tough job into a very simple one. A lens can be removed and reinstalled much faster than the time that it took for you to read this ad! Buy with confidence! If for any reason you are unhappy with your purchase simply return the wrench in as received condition for a full refund. We also make a number of other camera tools, click here to see our other auctions. Terms All orders will be shipped United States Postal Service first class mail. We accept US Domestic Money Orders, International Postal Money Orders in US funds and PayPal. Pennsylvania residents must add 6% sales tax or supply us with a tax exemption number. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Place a Bid!
|
HOME
|
|